Ejendals Tegera 18601 Diamond Grip Chemical-Resistant Nitrile Gauntlets
With a high level of chemical protection as well as excellent abrasion resistance, the Ejendals Tegera 18601 Chemical Resistant Nitrile Gauntlets are suitable for intense industrial applications. Their flock lining and diamond grip pattern ensure that they are both comfortable and effective for fine handling tasks, while tough chemical resistance makes them suitable for chemistry and laboratory work.
Key Information
- Gauntlet Code: 18601
- EN 388:2003 Rating: 4101
- EN 374:2003
- Suitable for contact with foodstuffs
- Latex-free
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Tegera 18601 Diamond Grip Chemical-Resistant Gauntlets
The Ejendals Tegera 18601 Gauntlets have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 0 |
Puncture Resistance | Level 1 |
EN 374
Code Letter | Chemical | Permeation Level |
A | Methanol | Level 2 |
J | n-Heptane | Level 6 |
K | Sodium hydroxide (40%) | Level 6 |
L | Sulphuric acid (96%) | Level 3 |
Uses of the Ejendals 18601 Chemical-Resistant Nitrile Gauntlets
Featuring a flexible, food-safe design, the Ejendals 18601 Gauntlets are suitable for a wide range of uses. Typical applications include:
- Agriculture
- Automotive
- Chemical work
- Laboratory work
- Metal fabrication
- Oil and gas
- Painting
- Paint spraying
- Paper industry
- Petrochemicals
- Rubber and plastic
The Ejendals 18601 Diamond Grip Gauntlets are designated Category III gauntlets. This means they feature a complex design that is intended to protect against the highest levels of risk.
Key Features of the Ejendals 18601 Chemical-Resistant Gauntlets
- Chemical-resistant nitrile gauntlets
- Food safe for food industry applications
- Diamond grip pattern and pre-curved fingers for easier handling
- Flock lining for ease of donning
- Excellent abrasion resistance
- Oil and grease resistant
- Latex free for reduced irritation
- Provides protection against:
- Abrasion resistance
- Contact with chemicals
- Contact with damp
- Contact with moisture
- Contact with oil and fat
- Corrosive injuries
- Risk of infection
Ideal for Fine Handling
These gauntlets feature an embossed diamond grip pattern as well as pre-curved fingers. This provides improved grip, making handling easier – particularly in oily environments.
Diamond palm and fingertip patterning for superior grip
Sizing of the Tegera 18601 Nitrile Gauntlets
The Ejendals Tegera 18601 Chemical-Resistant Nitrile Gauntlets are supplied in four different sizes, meaning they should be suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
At just 0.38mm thick, the Tegera 18601 Gauntlets have a thin design that provides a close, tight fit that is ideal for greater dexterity. These gauntlets have a universal length of 330mm in all sizes.
Documentation for the Ejendals Nitrile Chemical-Resistant Gauntlets
Conformity Statement | Instructions for Use |
| |