Ejendals Tegera 318 PVC Dot Grip Handling Gloves
Ideal for a wide variety of applications, the Ejendals Tegera 318 PVC Dot Grip Handling Gloves have excellent grip, good fingertip sensitivity and are breathable, making them both comfortable and effective in use. Food safe, they are ideal for food processing and service as well as non-food applications.
What's Included?
Key Information
- Glove Code: 318
- EN 388:2003 Rating: 224X
- EN 407 Rating: X1XXXX
- EN 511 Rating: 01X
- EN 420
- Food safe (not suitable for fatty foods)
- Size Range: 6 - 10
- Supplied as a pair
Resistance of the Ejendals 318 PVC Dot Grip Handling Gloves
The Ejendals Tegera 318 Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 2 |
| Tear Resistance | Level 4 |
| Puncture Resistance | N/A |
EN 407
| Property | Resistance Level |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Molten Metal Resistance (Small Splashes) | N/A |
| Molten Metal Resistance (Large Quantities) | N/A |
EN 511
| Property | Resistance Level |
| Convective Cold Resistance | Level 0 |
| Contact Cold Resistance | Level 1 |
| Water Permeability | N/A |
Uses of the Ejendals Tegera 318 Handling Gloves
With a versatile design, the Ejendals Tegera 318 are suitable for a large variety of uses. Typical applications include:
- Assembly
- Automotive
- Engineering
- Facilities
- Installation work
- Food handling
- Food processing
- Logistics
- Repair work
- Retail
- Service
- Shop work
- Transportation
The Ejendals 318 are designated Category II gloves, meaning they are suitable for medium duty applications and intermediate levels of risk.
Key Features of the Ejendals Tegera 318 PVC Gloves
- Light handling gloves with PVC dot grip pattern
- Food safe, phthalate-free design
- Withstands contact heat up to 100°C
- High level of tear resistance
- Breathable for comfort during extended use
- Ideal for a variety of light handling applications
- Provides protection against:
- Abrasion injuries
- Blisters
- Contact with dirt
- Grazes
- Lacerations
- Scratches
Tegera 318 Dot Grip Gloves
The Ejendals Tegera 318 feature a dot grip pattern on the palm and fingertips. As well as improving grip, these dots are made from phthalate-free polyvinyl chloride (PVC), making them suitable for use with food.
PVC dots offer extra grip
Sizing of the Ejendals Tegera 318 PVC Dot Grip Gloves
The Ejendals Tegera 318 are available in five different sizes, making them suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
As light handling gloves, the Ejendals Tegera 318 are designed for a close fit; they feature a knitting gauge of 13gg.
Materials of the Ejendals Tegera 318 Handling Gloves
- Outer Material Specification: Nylon (50%), cotton (20%), polyvinyl chloride (20%), polyester (5%), elastane (5%)
Documentation for the Ejendals Tegera 318 PVC Dot Grip Gloves
| Conformity Statement | Instructions for Use |
 | |
