Ejendals Tegera 7390 Chemical-Resistant Sandy Grip Thermal Gloves
Providing both chemical and thermal protection, the Ejendals Tegera 7390 Chemical-Resistant Sandy Grip Thermal Gloves offer excellent protection for a variety of environments. With a sandy finish for improved grip, and a fleece lining for warmth, they are both comfortable and effective in use.
Key Information
- Glove Code: 7390
- EN 388:2003 Rating: 4131
- EN 374 Rating: JKL
- EN 511 Rating: 121
- EN 420
- Available Sizes: 9, 10
- Supplied as a pair
Resistance of the Ejendals Tegera 7390 Chemical-Resistant Thermal Gloves
The Ejendals Tegera 7390 Gloves have been tested in accordance with European standards in order to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 1 |
EN 374
Code Letter | Chemical | Permeation Level |
J | n-Heptane | Level 2 |
K | Sodium hydroxide (40%) | Level 6 |
L | Sulphuric acid (96%) | Level 4 |
EN 511
Property | Resistance Level |
Convective Cold | Level 1 |
Contact Cold | Level 2 |
Water Permeability | Level 1 |
Uses of the Ejendals 7390 Sandy Grip Thermal Gloves
With a highly protective design, the Ejendals Tegera 7390 Gloves are suitable for a variety of uses. Typical applications include:
- Agricultural work
- Airport work
- Building work
- Chemical industry
- Cold stores
- Concrete work
- Construction
- Freezers
- HVAC installation
- Mining
- Oil and gas
- Petrochemicals
- Soil preparation
The Ejendals Tegera 7390 are designated Category III gloves, meaning they have been developed for the highest levels of risk.
Key Features of the Ejendals Tegera Sandy Grip Thermal Gloves
- Thermal chemical-resistant work gloves
- Fleece lining for effective thermal insulation
- Oil- and grease-resistant design
- Excellent abrasion resistance
- Sandy finish for improved grip
- Provides protection against:
- Contact with dirt
- Contact with oil and fat
- Corrosive injuries
Sizing of the Tegera 7390 Sandy Grip Gloves
The Ejendals Tegera 7390 are available in two different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Materials of the Ejendals Tegera Chemical-Resistant Sandy Grip Gloves
- Dipping Material: PVC (Vinyl)
- Lining Material: Fleece
- Antibacterial/Biocidal Treatment: Pyrithione zinc (CAS number 13463-41-7)
Documentation for the Ejendals Tegera Thermal Gloves
Conformity Statement | Instructions for Use |
| |