Ejendals Tegera 783 Oil-Repellent Nitrile Gloves
In high cut risk environments, it is crucial to use gloves that have been designed to protect your hands from all sorts of cut risks. With their Level 4 abrasion and tear resistance, the Ejendals Tegera 783 Oil-Repellent Nitrile Gloves are ideal for keeping your hands safe during most medium work applications, while their oil-repellent exterior and great grip ensure they are suitable for use in wet and dirty environments as well.
Key Information
- Glove Code: 783
- EN 388:2003 Rating: 4343
- EN 420:2003
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Ejendals 783 Oil-Repellent Nitrile Gloves
The Ejendals 783 Nitrile Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 3 |
Tear Resistance | Level 4 |
Puncture Resistance | Level 3 |
Uses of the 783 Oil-Repellent Nitrile Gloves
The Tegera 783 Oil-Repellent Gloves are designed for oily, greasy and dirty environments. This makes them suitable for the following applications:
- Agricultural work
- Assembly
- Automotive
- Brick handling
- Building and construction
- Concrete handling
- Decontamination
- Electrical installation
- Engineering
- Forestry
- Glass industry
- HVAC (Heating, ventilation and air conditioning) installation
- Installation work
- Maintenance, repair and operations (MRO)
- Metal fabrication
- Metalwork
- Mining
- Oil and gas
- Painting
- Petrochemical industry
- Repair work
- Sanitation
- Sheet metal handling
- Soil preparation
- Utilities
- Wood industry
The Tegera 783 Gloves are designated Category II gloves, which makes them suitable for most intermediate risk situations. Gloves are placed in this category when the risk is not assessed as irreversible or mortal.
Features of the Tegera 783 Oil-Repellent Gloves
- Fully dipped in nitrile for excellent cut resistance
- Oil-repellent properties with great levels of grip in the palm
- Suitable for light to medium work applications
- Supplied in a black/yellow design with a knitwrist cuff
- Provide protection against:
- Abrasion injuries
- Blisters
- Contact with dirt
- Contact with moisture
- Contact with oil and grease
- Cut injuries
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Oil-Repellent Nitrile Gloves
The 783 Nitrile Gloves are available in four sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Materials of the Tegera 783 Gloves
- Liner Material: Dyneema, lycra, nylon, 13gg
- Dipping: Fully dipped
- Dipping Material: Nitrile
- Grip Pattern: Reinforced grip pattern
- Material Specification: UHMWPE (50%), nitrile (30%) nylon (10%), elastane (10%)
Documentation for the Ejendals 783 Nitrile Gloves
Conformity Statement | Instructions for Use |
| |