Ejendals Tegera 8150 Chemical-Resistant Diamond Grip Gloves
Working with hazardous substances, such as chemicals or corrosive acids, requires protective gloves of the highest quality. The Ejendals Tegera 8150 Chemical-Resistant Diamond Grip Gloves are designed to protect your hands from a number of dangerous chemicals, while having good abrasion and tear resistance properties.
Key Information
- Glove Code: 8150
- EN 388:2003 Rating: 1010
- EN 374
- EN 420:2003
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Ejendals Tegera 8150 Chemical-Resistant Gloves
The Ejendals 8150 Diamond Grip Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 1 |
| Cut Resistance | Level 0 |
| Tear Resistance | Level 1 |
| Puncture Resistance | Level 0 |
EN 374 - 2
EN374-2 resistance to penetration by micro-organisms.
EN 374 - 3
EN374-3 Resistance to chemical hazards (permeation), namely the chemicals sodium hydroxide 40%, and sulfuric acid 96%.
Uses of the Tegera 8150 Chemical-Resistant Gloves
The Tegera 8150 Chemical-Resistant Gloves can be used in wet, moist and dirty environments. This makes them suitable for the following applications:
- Agriculture
- Care work
- Chemical work/technology
- Cleaning
- Kitchen work
- Laboratory work
- Sanitation
- Service industry
The Tegera 8150 Chemical-Resistant Gloves are designated Category III gloves, which means that they are designed to protect against the highest levels of risk, such as highly corrosive acids. These are gloves of complex design, suitable for irreversible or mortal risks.
Features of the 8150 Diamond Grip Gloves
- Ensure a high degree of protection against chemical hazards
- Flexible and comfortable design, suitable for longer wear
- Perfect for use in moist and damp environments
- Supplied in a flock-lined blue design
- Feature a diamond grip pattern for improved handling
- Approved for handling foodstuffs
- Provide protection against:
- Contact with damp
- Contact with moisture
Sizing of the Tegera 8150 Diamond Grip Gloves
The 8150 Chemical_Resistant Gloves are available in four sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Materials of the Ejendals Chemical-Resistant 8150 Gloves
- Material: Latex
- Thickness: 0.4mm
- Inside: Flock-lined
- Grip Pattern: Diamond grip pattern
Chemical Resistance Guide
Documentation for the Ejendals Tegera 8150 Gloves
| Conformity Statement | Instructions for Use |
| |
