Ejendals Tegera 883A Nitrile Coated Sensitive Handling Gloves
With water and oil-repellent palms, excellent fingertip sensitivity and Level 4 abrasion and tear resistance, the Ejendals Tegera 883A Nitrile Coated Sensitive Handling Gloves are both flexible and exceptionally safe. You can use them for a variety of light to medium-work applications, assuring your hands will remain protected even in dirty, oily and greasy environments.
Key Information
- Glove Code: 883A
- EN 388:2003 Rating: 4131
- EN 420
- Size Range: 6 - 10
- Supplied as a pair
Resistance of the Ejendals 883A Nitrile Handling Gloves
The Ejendals Tegera 883A Handling Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 3 |
Puncture Resistance | Level 1 |
Uses of the Tegera 883A Nitrile Coated Gloves
With its water and oil-repellent properties in the palm, excellent fingertip sensitivity and high levels of abrasion and tear resistance, the Tegera 883A Nitrile Coated Sensitive Gloves can be used for various tasks. They are suitable for the following applications:
- Agricultural work
- Airport work
- Assembly
- Automotive
- Building
- Carpentry
- Concrete work
- Construction
- Engineering
- Forestry
- Gardening
- HVAC (Heating, ventilation and air conditioning) installation
- Inspection
- Installation (including electrical)
- Machine operation and driving
- Maintenance, repairs and operations
- Metal fabrication
- Mining
- Oil and gas
- Painting
- Petrochemical
- Repair work
- Rubber and plastic
- Sanitation
- Sheet metal work
- Soil preparation
- Tiling
- Transportation
- Utilities
- Warehouse work
The 883A Gloves are designated Category II gloves, meaning that they should be suitable for most medium-duty tasks.
Features of the Ejendals Tegera 883A Nitrile Coated Handling Gloves
- Lightweight lycra/nylon gloves for fine handling
- Palm-dipped with nitrile for water and oil-repellent properties in the palm
- Excellent fingertip sensitivity and high levels of protection
- Supplied in a black.grey design with foam patterning for great levels of grip
- Suitable for use in oily, greasy and dirty environments
- Provide protection against:
- Abrasion injuries
- Contact with damp
- Contact with fat
- Contact with oil
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 883A Gloves
The Ejendals Tegera 883A Gloves are available in five sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 6 | 152mm | 160mm |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Materials of the 883A Sensitive Handling Gloves
- Liner Material: Lycra, nylon 15gg
- Dipping: Palm-dipped
- Dipping Material: Nitrile foam
- Grip Pattern: Foam grip pattern
- Material Specification: Nitrile (30%), nylon (40%), elastane (30%)
Documentation for the Ejendals Tegera 883A Handling Gloves
Conformity Statement | Instructions for Use |
| |