HexArmor NXT 10-302 Kitchen Safety Gloves HEX10-302
The HexArmor NXT 10-302 Kitchen Safety Gloves HEX10-302 are reusable, designed to be worn under standard nitrile, latex or vinyl gloves during food preparation and manufacturing. They are tested to EN 388, ideal for protecting the fingers most likely to be damaged by knife strikes when processing food.
What's Included?
- 12 x Pairs of Cut Resistant Gloves
Key Information
- Glove code: HEX10-302
- EN 388
- Size range 7 (small) - 10 (extra large)
- Supplied in a case of 12 pairs
Resistance of the HEX10-302 Gloves
The HexArmor NXT Cut Resistant Gloves have a rating of 4X42A for EN 388 (Protection Against Mechanical Risks) in order to ensure reliability. Please see a breakdown of the results in the table below.
Resistance Type | Score |
Abrasion Resistance | 4 |
Blade Cut Resistance | X |
Tear Resistance | 4 |
Puncture Resistance | 2 |
TDM Cut Resistance | A |
Applications for the HexArmor NXT 10-302 Cut Resistant Gloves
The HexArmor NXT 10-302 Cut Resistant Gloves are ideal for the following uses:
- Food manufacturing and preparation
- Cutting and processing
- De-boning applications
- Plastics trimming
- Knife and blade handing
- Glass manufacturing and glazing
- Engineering and manufacture
- Local authority work
- Automotive industry work
- Waste management
Suitable Working Environments
The HexArmor NXT 10-302 Cut Resistant Gloves should be used in the following working environments:
Sizing of the HexArmor NXT 10-302 Cut Resistant Safety Gloves
Please measure your hand across the top of the palm. Then select the correct sized glove from the table below. If your size falls on a sizing boundary, please select the larger size for comfort. HexArmor NXT 10-302 Cut Resistant Safety Gloves are supplied in cases of 12 gloves. Each glove is ambidextrous and can therefore be worn on either the left or right hand perfectly.
Size | Measurement | Product Code |
Small / 7 | 7 - 8cm | HEX10-302/S |
Medium / 8 | 8 - 9cm | HEX10-302/M |
Large / 9 | 9 - 10cm | HEX10-302/L |
Extra Large / 10 | 10 - 11cm | HEX10-302/XL |
SuperFabric for Optimal Safety
The SuperFabric plated areas of the gloves (the silvery grey area on the front and back of the glove protecting the thumb, forefinger and second finger) provides abrasion, puncture, tear and cut resistance to keep you safe while you work.
Superior Cut and Abrasion Resistance
The HexArmor NXT 10-302 Cut Resistant Gloves are manufactured from SuperFabric material and Coretek fibre, providing superior cut and abrasion resistance when compared with traditional HDPE (High Density Polyethylene) gloves. These cut-resistant safety gloves protect your hands from sharp objects, all while keeping your hands cool and retaining excellent dexterity.
Additional Documentation