JSP Force 8 Respirator with PresstoCheck P3 Filters
Designed for use when working with dangerous fumes, the JSP Force 8 Respirator with PressToCheck P3 Filters will protect you against welding fumes, dusts, aerosols, plaster, mists and more. Easy to fit and extremely comfortable, this respirator is perfect for a wide range of industries.
What's in the Box?
With your purchase you will receive:
Where Can I Use the JSP Force 8 Respirator with PressToCheck P3 Filters?
The Force 8 Respirator and PressToCheck Filters are best suited to use when working with dangerous and harmful fumes. These substances include:
- Dusts
- Mists
- Water based painting
- Rubbing down paint
- Power tool dust
- Glyphosate (weed killer)
- Fibre glass
- Plaster
- Silica
- Wood
- Welding fumes
Key Features
- Features 2 dust filters for JSP respirators
- Easy to fit by pulling straps over your head
- Comfortable fit perfect for extended use
- Filters out bad fumes when used with a respirator
- Comfortable half mask for breathing resistance
- Features a quick release harness for easy fit
- Thermoplastic rubber can mould to most face shapes
- CR2 reflective strips ensure visibility in low light
- Low profile angle for minimum visual impairment
How Comfortable Is the JSP Force 8 Face Mask?
The JSP Force Mask has been designed with comfort in mind, which is why the ultra lightweight harness structure cradles the head. The mask is designed to be lightweight so that you can use the mask over an extended period of time without developing fatigue. As a result, it is one of the lightest face masks on the market.
How Safe Is the JSP Force 8 Face Mask?
The JSP Force 8 Mask is fully certified, adhering to EN 140, EN 14387 and EN 143. The mask is an extremely safe mask, and when used with the correct filters and cartridges it will protect you well against particulates, gases and vapours.
How Do I Fit the JSP P3 Dust Filters?
Fitting the JSP P3 Filters to your respirator or mask is incredibly easy. All you need to do is remember three things; fit it, press it and check it.
- Fit It: Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
- Press It: Press the front and backs of both filter covers together to stop air from entering through the filters.
- Check It: No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
Sizing Information
The Force 8 Face Mask is supplied here in the size Medium. It can also be purchased separately in sizes Small and and Large.
Conformity Statement
