MCR Safety CT1018NA Nitrile Air Diamond Dyneema Cut Proof Gloves

  • Pair of Dyneema shell gloves with nitrile air palm coating
  • Well suited to glass handling, mechanics handling and steel handling
  • Nitrile air palm enables excellent grip in wet, dry and oily conditions
  • Outstanding resistance to abrasion, cut and tear
Glove Size:  
Our Price:  £10.17
Excl. VAT. (£12.20 Inc. 20% VAT)

MCR Safety CT1018NA Nitrile Air Diamond Dyneema Cut Proof Gloves

Constructed from a tough Diamond Dyneema 3 shell with nitrile air coating on the palm, the MCR Safety CT1018NA Nitrile Air Diamond Dyneema Cut Proof Gloves offer excellent resistance to abrasion, cut and tear, and enable high levels of grip in wet, dry and oily conditions. As a result, these strong and dexterous safety gloves are ideal for applications in the automotive, manufacturing, glass, steel and construction industries.

Key Information

  • Glove Code: CT1018NA
  • EN 388:2003 Rating: 4542
  • Size Range: 7 - 10
  • Supplied as a pair

Resistance of the Nitrile Air CT1018NA Cut Proof Gloves

The MCR Diamond Dyneema CT1018NA Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below: 

EN 388

Property Resistance Level
Abrasion Resistance Level 4
Cut Resistance Level 5
Tear Resistance Level 4
Puncture Resistance Level 2

Uses of the Diamond Dyneema CT1018NA Diamond Dyneema Gloves

Providing excellent protection against cut and abrasion, with high levels of grip in dry, wet and oily conditions, the Diamond Dyneema Nitrile Air Gloves are suitable for a wide range of applications, including (but not limited to):

  • Automotive
  • Aerospace
  • Construction
  • Manufacturing
  • Glass
  • Steel
  • Shipping
  • Carpentry
  • Oil
  • Gas

Key Features of the Diamond Dyneema Nitrile Air Gloves

  • Diamond Dyneema shell with nitrile air palm coating
  • Excellent resistance to abrasion, cut and tear
  • Exceptional grip in wet, dry and oily conditions
  • Lightweight design ensures dexterity and comfort
  • Nitrile air palm coating is oil-repellent

Sizing of the MCR Safety Nitrile Air CT1018NA Gloves

The MCR Safety Diamond Dyneema Nitrile Air CT1018NA Work Gloves are available in sizes 7 - 10, one of which should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.

Indications of Where to Measure Your Hand

Size Palm Circ. Palm Length Min. Total Length 
Size 7 178mm 170mm 230mm
Size 8 203mm 182mm 240mm
Size 9 229mm 192mm 250mm
Size 10 254mm 204mm 260mm

Materials of the MCR Safety CT1018NA Work Gloves

  • Shell Material: Diamond Dyneema
  • Coating: Nitrile Air

Documentation for the MCR Safety Gloves

Conformity Statement Instructions for Use
PDF Link PDF Link

Be the first to Write a Review for this item!

Ask a Question

If you haven't found what you're looking for with our listing or if there is anything you would like to ask, please feel free to fill in the form below and we will strive to find your answer as soon as possible. Our team of workwear experts have a huge base of knowledge that allows them to answer any questions that you might have regarding this product.

Name: *
Email Address: *
Your Message: *
Please enter your query here
 *
Please add the two numbers

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 0598 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE

Coronavirus Update

Please note that, due to the current COVID-19 pandemic, our processing time may increase slightly. We would advise that orders may be set back by as much as five working days, though we are striving to keep our delivery schedule as close to normal as possible.

If you have been waiting over 7 working days for your order and would like an update, please contact our Customer Care team at helpdesk@workwear.co.uk.