Portwest FB30 Structural Fire Firefighter Jacket

  • Coat conforms with the highest firefighting PPE requirements
  • Ideal for fighting the most severe of structural fires
  • Features moisture barrier to help control temperature
  • Quick release zip and radio pocket for maximum functionality
Size:  
Our Price:  £321.62
Excl. VAT. (£385.94 Inc. 20% VAT)

Portwest FB30 Structural Fire Firefighter Jacket

The Portwest FB30 Structural Fire Firefighter Jacket is designed for fighting the most severe of structural fires, earning an impressive Level 2 certification under EN 469 due to the addition of a waterproof moisture barrier. The jacket will protect you from flames and radiant heat, while featuring a radio pocket and quick release zip for maximum functionality in tense, time pressured situations.

What Can the Structural Fire Firefighter Jacket Do for Me?

The jacket has numerous helpful features, including the following:

  • Flame Resistant: Nomex/Lenzing FR viscose outer shell fabric protects against flame injury and burns caused by conductive heat
  • Breathable: Middle shell acts as a moisture barrier, allowing internal moisture and heat to escape and protecting against the convective transfer of heat
  • Heat Resistant: Inner thermal shell and lining offers protection against heat from proximity to skin, pockets of air between all three layers also help to insulate
  • Functional: Radio pocket for handy radio access and sew on flame resistant industrial wash tape for increased visibility
  • Easy Access: Quick release zip, hook-and-loop cuffs and throat tab on neck for quick and easy access

Who Can Use the Firefighter Jacket?

The firefighter coat has been designed specifically to combat structural fires, where the levels of radiant heat are far greater than outdoor fires. Apart from the protective qualities of the jacket, functional features such as the radio pocket and quick release zip further suit the jacket to firefighting work. The jacket is ideally paired with the Portwest FB31 Firefighter Trousers.

Which Size Is Right for Me?

To establish the correct size for you please measure the circumference of your chest as illustrated in the diagram. Then, with reference to the table below, select the correct option from the drop-down menu at the top of the page.

Chest Measurement

Size Chest Circ. (cm)
Small 92 - 96cm
Medium 97 - 104cm
Large 105 - 112cm
Extra Large 113 - 124cm
XX-Large 125 - 132cm
XXX-Large 133 - 140cm
XXXX-Large 141 - 148cm

What Certifications Has the Structural Fire Jacket Received?

The Portwest jacket has undergone extensive testing, so you can be certain of your safety at work. It has received the following certification:

  • EN 469
    • Level 2

What Do These Certifications Mean?

  • EN 469: This standard specifies requirements for protective clothing to be worn during firefighting operations and associated activities

The Portwest jacket has been awarded the more stringent Level 2 certification under EN 469, which is only awarded when the garment includes a waterproof moisture barrier. The jacket is well suited to facing severe structural fires.

Portwest FB30 Structural Fire Firefighter Jacket
Portwest FB30 Jacket

Key Features of the FB30 Structural Fire Jacket

  • Anti-wicking strip at the hem for moisture management
  • Inner ribbed cuffs for warmth and comfort
  • Quick release zip for instant access
  • Radio pocket designed to fit all sizes
  • Throat tab on neck for easy access
  • Hook-and-loop cuffs for a secure fit
  • Sew on flame resistant reflective tape for increased visibility
  • Knitted cuffs with thumb loops for a secure fit

Washing Instructions for the Portwest Jacket

  • Wash at 60°C or below
  • Do not bleach
  • Tumble dry at medium temperatures
  • Iron at medium temperatures
  • Fasten all closures before washing
  • Machine wash using liquid detergent
  • Hand dry out of direct sunlight
  • Do not iron on reflective tape
  • Tumble drying is necessary to activate the fluorocarbon finish

Technical Details of the Portwest Jacket

  • Moisture Barrier: FR Knitted fabric with PU membrane, 85g
  • Thermal Layer: FR non-woven
  • Inner Thermal Layer: FR Aramid Viscose, 360g

Documentation

Conformity Statement User Instructions 1
Declaration of Conformity User Instructions

Be the first to Write a Review for this item!

Ask a Question

If you haven't found what you're looking for with our listing or if there is anything you would like to ask, please feel free to fill in the form below and we will strive to find your answer as soon as possible. Our team of workwear experts have a huge base of knowledge that allows them to answer any questions that you might have regarding this product.

Name: *
Email Address: *
Your Message: *
Please enter your query here
 *
Please add the two numbers

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 0598 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE

Coronavirus Update

Please note that, due to the current COVID-19 pandemic, our processing time may increase slightly. We would advise that orders may be set back by as much as five working days, though we are striving to keep our delivery schedule as close to normal as possible.

If you have been waiting over 7 working days for your order and would like an update, please contact our Customer Care team at helpdesk@workwear.co.uk.