Portwest FP25 Double Lanyard with Shock Absorber
Designed for use in fall arrest systems, the Portwest FP25 Double Lanyard with Shock Absorber can ensure that you fall only a short distance, with the tear open energy shock absorber preventing injury. Featuring two 120cm ropes for extra comfort during a fall, this lanyard is designed to be easy to use.
What's Included?
With your purchase you will receive:
- 2 x 120cm Polyester Ropes
- 2 x Scaffold Hooks
- 1 x Snap Hook
Key Points of the Portwest Double Lanyard with Shock Absorber
- Length: 120cm
- Minimum Height Clearance: 6.75 Metres
- Certification:
- EN 354: Lanyards
- EN 358: Work Positioning
- EN 362: Connectors
- Materials:
- Polyester Rope
- Alluminium
- Alloy Steel
- PVC
What Is the Portwest Double Lanyard For?
The Portwest Double Restraint Lanyard is suitable for use as part of a fall arrest system. Ideally, it should protect you when working from height in case of when you fall.
What Is Fall Arrest?
A Fall Arrest system will not stop you from falling. It is instead a system that ensures a fall is carried out in a safe and controlled manner. This enables a worker to carry out their job, while a body harness is connected to a suitable shock absorbing system.
This will not prevent free fall. You will still fall, however be caught by a fall arrest block, rope, a lanyard and your harness. Training MUST be provided, and an escape plan MUST be in place before an accident takes place.
- Scaffolding
- Wind energy
- Tower crane erection
- Tower crane maintenance
- Pallet racking
- More...
Please note that you need full training on fall arrest systems before you use this kit.
How Do I Use the Portwest Double Lanyard?
You must receive proper training before taking place in work positioning. Full user instructions are supplied with your purchase, or can be viewed by clicking on the PDF below.
| Click Here for User Instructions |
 |
How Safe Is the Portwest Double Lanyard FP25?
The Portwest Lanyard with Shock Absorber is fully certified to high EN standards, which ensures that the equipment you are using is fully safe. The Portwest Single Restraint Lanyard meets the following standards
- EN 354: Lanyards - Indicates that the lanyard has withstood a free fall test without releasing the load or doing undue damage.
- EN 358: Work positioning - Confirms that the work positioning belt and lanyard have withstood a static force test for more than three minutes.
- EN 362: Fall Arrest - Guarantees that the connector associated with this range has been fully certified to all relevant standards.
What Materials Is the Portwest Double Lanyard Made From?
The Portwest Double Lanyard is made from the following:
- Polyester
- Alloy Steel
- Aluminium
- PVC
What Documentation Is Available?
| Click Here for the Conformity Statement |
|
