Portwest FR25 BizFlame Plus Jacket
The Portwest FR25 Bizflame Plus Jacket can protect against a wide range of heat- and flame-related threats, including molten metal splashes, arc flash, flame spread and convective, contact and radiant heat. Comfortable and easy to wear, this jacket is well suited to tasks such as welding, steelworks and tasks with an arc flash hazard.
What Will the Portwest FR25 Jacket Protect Me From?
The Portwest FR25 Bizflame Jacket has been designed for workplaces with a flame risk, such as those in arc-flash and welding environments. Suitable risks include:
- High risk molten metal splash
- Arc Welding: (13.6CAL/CM)
- Arc Welding: Class 1
- Flame spread
- Convective, contact and radiant heat
What Can I Use the Portwest Bizflame Jacket For?
You can use the Portwest Bizflame Jacket for extreme flame risk environments, particularly those associated with welding, arc flash and molten metal. The jacket is fully certified to all relevant standards, meaning that you can have faith in what is says. Suitable industries include:
- Arc flash welding
- Welding
- Molten metal work
- Metal work
- Steel work
Which Sized Jacket Should I Buy?
To purchase the correct sized jacket for you, you can measure the circumference of your chest, and match to the sizing guide below. Once this has been completed, you can choose your size and colour by clicking on the drop down menu at the top of the page.
| Size | Chest Measurement (inches) |
| Small | 36 - 38" |
| Medium | 39 - 41" |
| Large | 42 - 44" |
| Extra Large | 46 - 48" |
| XX-Large | 49 - 52" |
What Certifications Does the Portwest FR25 Bizflame Jacket Receive?
To ensure that you can trust the Portwest FR25 Bizflame Plus, it has been tested a range of different EN standards. These are as follows:
- EN 11612:
- A1: Limited flame spread
- A2: Limited flame spread, hemmed
- B1: Convective heat (scale 1-3)
- C1: Radiant heat (scale 1 - 4)
- E2: Molten iron splash (scale 1 - 3)
- F1: Contact heat (scale 1 - 3)
- EN 11611:
- Class 2: Protects against high risk welding techniques and situations
- A1: Limited flame spread
- A2: Limited flame spread, hemmed
- EN 1149:
- 5: Protects against electrostatic discharge in case of an explosion
- IEC 61482:
- Class 1 IEC 2: Protective clothing against thermal hazards of an electrical arc
How Flame Resistant Is the Portwest FR25 Bizflame Jacket?
The Portwest Bizflame Jacket is designed for tasks such as welding, where there is a higher risk of flames. The jacket will prevent flames from spreading and from burning the skin. It has been tested to all relevant certification, including radiant, convective and contact heat.
How Comfortable Is the Portwest Bizflame Jacket?
The Bizflame Plus is well suited to long, strenuous tasks, especially as the curved back hem and 80% cotton liner offers superb comfort during use. Well suited to protecting against radiant, convective and contact heat, this jacket promises comfort in high risk tasks when it matters most.
Key Features Of the Portwest Bizflame Jacket
- Protection against radiant, convective and contact heat
- Certified protection against splashes from molten metal
- Suitable for washing if dirty
- Class 2 welding protection for high risk tasks
- Concealed stud and zip fastening
- Features 5 pockets for ample storage
- Radio loops allow you to clip-on a radio
- External label for quick identification of protection levels
What Documentation Is Available?
| Conformity Statement | Instructions for Use - 1 | Instructions for Use - 2 |
 | | |
