UCi BoaFlex Chemical-Resistant Thermal Gauntlet Gloves R430
Most gloves become stiff in cold conditions, which can reduce your dexterity and therefore your ability to perform your role at work. The UCi BoaFlex Chemical-Resistant Thermal Gauntlet Gloves R430 are made from specially formulated PVC that remains flexible even in low temperatures, allowing you to get on with the task at hand.
Key Information
- EN 388:2003 Rating: 4121
- EN 374:2003 Rating: 222 (AJL)
- EN 420:2002
- EN 511:2006 Rating: 121
- Available Sizes: 8 - 10
- Supplied as a pair
Resistance of the UCi BoaFlex R430 Thermal Gauntlet Gloves
The BoaFlex R430 Chemical-Resistant Gauntlet Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 1 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 1 |
EN 374
The Chemical-Resistant Gauntlet Gloves have an AQL of 0.65, meaning they obtained a performance level three in this area.
Code Letter | Chemical | Resistance Level |
A | Methanol | Level 2 |
J | n-Heptane | Level 2 |
L | Sulphuric Acid 96% | Level 2 |
EN 511
Property | Resistance Level |
Convective Cold Resistance | Level 1 |
Contact Cold Resistance | Level 2 |
Water Penetration Resistance | Level 1 |
Uses of the BoaFlex R430 Chemical-Resistant Gauntlet Gloves
The UCi Chemical-Resistant Thermal Gauntlet Gloves help protect your hands against a range of hazards, including a number of chemicals, oil and water. As a result, they can be used for a wide range of applications. This includes the following:
- Chemical processing
- Chemistry work
- Cleaning work
- Cold store work
- Cold weather work
- Debris handling
- Domestic waste handling
- Fishing work
- Grip work
- Household cleaning
- Industrial cleaning
- Industrial waste handling
- Industrial work
- Janitor work
- Offshore gas work
- Offshore oil work
- Oil filtration
- Oil handling
- Oil refining
- Outdoor work
- Petro-chemical work
- Plumbing work
- Public utilities work
- Recycling work
- Refuse collection work
- Refuse handling
- Washing-up work
- Waste handling
- Wet work
- Winter work
These gloves are designated Category III gauntlet gloves, meaning they should be suitable for most heavy-duty tasks. This makes them suitable for most tasks where chemicals, oil or water are involved. The gloves also offer moderate resistance against mechanical hazards, meaning they should be suitable even when there is a risk of abrasion or tears.
Key Features of the UCi BoaFlex Thermal Gauntlet Gloves
- Tough, chemical-resistant gauntlet gloves
- Designed with soft and flexible cuffs
- Made from PVC that remains flexible in low temperatures
- Triple-coated glove area with non-slip coating
- Knitted acrylic and wool lining for added insulation
- 'Sanitised' for improved freshness and comfort
- Provides protection for prolonged periods of use
- Fully compliant with REACH
Sizing of the Chemical-Resistant Gauntlet Gloves
The BoaFlex R430 Gauntlets are available in three sizes to fit most hands. Please measure the circumference of your hand around the knuckles (excluding your thumb) with your palm open and your fingers together. Next, measure the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 9 (Large) | 229mm | 192mm |
Size 10 (Extra Large) | 254mm | 204mm |
Documentation for the Gauntlet Gloves
Conformity Statement | Instructions for Use |
| |