Ejendals Tegera 2207 Nitrile Dipped Oil-Resistant Gloves
Standard work gloves are often ineffective for handling in wet or oily conditions. However, dipping the glove liner in a compound such as nitrile or polyurethane enables excellent grip and resistance in such environments.
The Ejendals Tegera 2207 Nitrile Dipped Oil-Resistant Gloves are 3/4 dipped in nitrile for excellent abrasion resistance as well as oil repellent palms and knuckles. With a durable, hardwearing design, they are suitable for a variety of industrial applications.
Key Information
- Glove Code: 2207
- EN 388:2003 Rating: 4221
- EN 420
- Size Range: 8 - 10
- Supplied as a pair
Resistance of the Ejendals 2207 Nitrile Dipped Gloves
The Ejendals 2207 Oil-Resistant Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 2 |
Tear Resistance | Level 2 |
Puncture Resistance | Level 1 |
Uses of the Ejendals Tegera 2207 Oil-Resistant Gloves
With an oil and grease resistant design, the Ejendals 2207 are suitable for a large variety of uses. Typical applications include:
- Agricultural work
- Automotive
- Building
- Concrete work
- Construction
- Engineering
- Gardening
- HVAC installation
- Inspection
- Installation
- Machine operation
- Metal fabrication
- Mining
- Oil and gas
- Petrochemicals
- Repair work
- Sheet metal work
- Soil preparation
- Utilities
The Ejendals Tegera 2207 Gloves are designated Category II gloves. This means they are suitable for medium-duty applications and intermediate levels of risk.
Key Features of the Ejendals Nitrile Dipped Oil-Resistant Gloves
- Nitrile-dipped synthetic work gloves
- Oil- and grease-repellent palm and knuckles
- Durable design with high abrasion resistance
- Extended cuff for wrist protection
- Provides protection against:
- Abrasion injuries
- Contact with damp
- Contact with dirt
- Contact with moisture
- Contact with oil and fat
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 2207 Dipped Oil-Resistant Gloves
The Ejendals Tegera 2207 are supplied in three different sizes. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
As medium duty work gloves, the Ejendals Tegera 2207 are designed for a reasonably close fit.
Materials of the Ejendals Tegera 2207 Gloves
- Dipping Material: Nitrile
- Cuff Material: Textile
- Material Specification: Nitrile (70%), cotton (30%)
Documentation for the Ejendals Tegera 2207 Work Gloves
Conformity Statement | Instructions for Use |
| |