Ejendals Tegera Infinity 8808 Cut-Resistant Nitrile Dipped Gloves
High-performance cut protection gloves usually don't provide comfort and dexterity. The Ejendals Tegera Infinity 8808 Cut-Resistant Nitrile Dipped Gloves combine synthetic materials with Ejendals' state-of-the-art Cut Resistant Fiber (CRF) technology, which makes them flexible, lightweight and highly protective.
Key Information
- Glove Code: 8808
- EN 388:2003 Rating: 4543
- EN 407:2004 Rating: X1XXXX
- EN 420:2003
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Ejendals 8808 Cut-Resistant Nitrile Dipped Gloves
The Ejendals 8808 Cut-Resistant Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 5 |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
EN 407
| Property | Resistance Level |
| Burning Resistance | N/A |
| Contact Heat Resistance | Level 1 |
| Convective Heat Resistance | N/A |
| Radiant Heat Resistance | N/A |
| Molten Metal Resistance (Splashes) | N/A |
| Molten Metal Resistance (Large Quantities) | N/A |
Uses of the Tegera 8808 Nitrile Dipped Gloves
The Tegera 8808 Gloves are versatile, cut-resistant handling gloves, recommended for an array of applications. Typical industries of use include:
- Airport work
- Assembly
- Brickwork
- Building
- Carpentry
- Concrete work
- Construction
- Engineering
- Fine assembly
- Glasswork
- HVAC installation
- Installation
- Machine driving
- Machine operation
- Metal work
- Paper mill work
- Repairs
- Servicing
- Sheet metal handling
- Shop work
- Transportation
- Warehouse
The 8808 Gloves are designated Category II gloves, making them suitable for most medium-weight tasks.
Features of the Tegera 8808 Cut-Resistant Gloves
- CRF technology ensures great dexterity and cut resistance
- Three-quarter dipped for excellent oil and grease resistance
- Withstand contact heat of up to 100°C
- Anatomically designed for an ultra-comfortable fit
- Machine washable at 40°C
- Provide protection against:
- Abrasion injuries
- Blisters
- Chapping
- Contact with dirt
- Contact with fat and oil
- Cut injuries
- Drying out
- Grazes
- Lacerations
- Scratches
CRF Technology
The 8808 Cut-Resistant Gloves feature Cut Resistant Fiber (CRF) technology, which is designed to provide exceptional dexterity. This way you won't have to make a compromise between protection and comfort.
Three-Quarter Coating
The Tegera 8808 Gloves feature palms that are 3/4 dipped in nitrile and then a mixture of nitrile foam and water-based polyurethane, and finished with a foam grip pattern. This makes them highly oil and grease resistant, which is ideal for handling tasks involving oily components. At the same time, the lower back and cuff area remain uncoated for better ventilation and user comfort.
Moderate Heat Resistance
The Ejendals 8808 Gloves are able to withstand contact heat up to 100°C. While this is not enough to resist sustained high temperatures, it does provide peace of mind for mechanical or assembly line work.
Sizing of the Ejendals Tegera 8808 Gloves
The Tegera 8808 Cut Resistant Gloves are available in four sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Materials of the Ejendals Tegera 8808 Gloves
- Liner Material: CRF Technology, glass fibre thread, nylon, spandex, 15gg
- Dipping: 3/4 dipped, double dipped
- Dipping Material: Nitrile, nitrile foam/water-based polyurethane
- Material Specification: Nitrile (30%), glass fibre thread (25%), HPPE (25%), nylon (10%), elastane (10%)
Documentation for the Ejendals Tegera 8808 Gloves
| Conformity Statement | Instructions for Use |
 | |
