Ejendals Tegera 10990 PU Palm-Coated Handling Gloves
Handling precision tools and components is difficult enough in itself, but in greasy or oily environments it can become almost impossible. The Ejendals Tegera 10990 PU Palm-Coated Handling Gloves are palm coated for excellent grip, and provide a high level of protection while retaining a high level of fingertip sensitivity for delicate handling tasks. With a breathable back and a PU-coated palm, they are ideal for fine handling in dirty or oily environments.
Key Information
- Glove Code: 10990
- EN 388:2016 Rating: 4342B
- EN 420
- Size Range: 7 - 10
- Supplied as a pair
Resistance of the Tegera 10990 Palm-Coated Handling Gloves
The Ejendals Tegera 10990 Gloves have been tested in accordance with EU standards to ensure high levels of performance. They have demonstrated good all-round resistance against mechanical hazards. Please find the results below:
EN 388
Property | Resistance Level |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 3 |
Tear Resistance | Level 4 |
Puncture Resistance | Level 2 |
ISO Cut Resistance | B |
Uses of the Tegera 10990 PU Palm-Coated Gloves
With a highly resistant, breathable liner and an oil and grease-resistant palm, the Tegera 10990 are ideal for precision work in dirty or greasy conditions. Typical applications include:
- Assembly
- Automotive
- Brick handling
- Building
- Carpentry
- Concrete handling
- Construction
- HVAC
- Installation
- Metal fabrication
- Soil preparation
The 10990 Palm-Coated Gloves are designated Category II gloves, meaning that they are suitable for medium-duty tasks and intermediate risks.
Key Features of the Ejendals 10990 Handling Gloves
- Palm-coated work gloves for precision work
- Grease-resistant palm for handling oily components
- Breathable back to ensure comfort during use
- Extended knitwrist cuff for wrist comfort and protection
- Good all-round mechanical resistance
- Good fingertip sensitivity for fine handling tasks
- Provides protection against:
- Abrasion injuries
- Contact with dirt
- Contact with oil and grease
- Cut injuries
- Lacerations
- Scratches
Sizing of the Tegera PU Palm-Coated Handling Gloves
The Ejendals Tegera 10990 Gloves are available in four different sizes, meaning they should be suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your finger together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Please note that the 10990 Gloves feature a close-fitting design to ensure maximum dexterity for precision tasks.
Materials of the Ejendals 10990 Palm-Coated Handling Gloves
- Liner Material: Dyneema, Lycra, nylon, 13gg
- Dipping Material: Polyurethane
- Material Specification: UHMWPE (55%), polyurethane (30%), elastane (15%)
Documentation for the Ejendals Tegera 10990 PU Palm-Coated Gloves
Conformity Statement | Instructions for Use |
| |