Ejendals Tegera 292 Waterproof Thermal-Insulated Work Gloves
Ideal for a variety of work in cold conditions, the Ejendals Tegera 292 Waterproof Thermal-Insulated Work Gloves are fully waterproof and feature a winter lining for effective thermal insulation. With a supple full-grain goatskin palm, they have good fingertip sensitivity for effective handling, even in cold and wet environments.
Key Information
- Glove Code: 292
- EN 388:2003 Rating: 2111
- EN 511 Rating: 020
- EN 420
- Size Range: 6 - 12
- Supplied as a pair
Resistance of the Ejendals 292 Insulated Gloves
The Ejendals Tegera 292 Waterproof Gloves have been tested in accordance with European standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 1 |
| Puncture Resistance | Level 1 |
EN 511
| Property | Resistance Level |
| Convective Cold Resistance | Level 1 |
| Contact Cold Resistance | Level 1 |
| Water Permeability | Level 1 |
Uses of the Tegera 292 Gloves
With a reinforced, weather-resistant design, there are a number of situations in which the Tegera 292 Work Gloves can be used. Some of those applications include:
- Agricultural work
- Airport work
- Building work
- Carpentry
- Cold stores
- Construction
- Driving
- Forestry work
- Gardening
- General repair work
- HVAC installation
- Installation work
- Logistics
- Machine operation
- Soil preparation
- Transportation
- Utilities
- Wood industry
The 292 gloves are designated Category II gloves, meaning that they should be suitable for most medium-weight tasks. They are designed specifically for use in cold and wet environments, making them ideal for most winter and outdoor work that doesn't include other hazards.
Key Features of the Ejendals Tegera 292 Winter Work Gloves
- Cold insulation gloves designed for winter and outdoor work
- Good fingertip sensitivity for fine handling tasks
- Flexible design is comfortable and allows dexterity
- Thinsulate material keeps hands warm without adding bulk to gloves
- Extended knitwrist cuff for wrist protection and warmth
- Elastic closure with a 360° design for greater comfort
- Stylish and understated white, grey, and blue design
- Reinforced finger and thumb for greater longevity
- Provides protection against:
- Blisters
- Contact with cold
- Contact with dirt
- Contact with moisture or damp
- Grazes
- Lacerations
- Scratches
Sizing of the Ejendals Tegera 292 Gloves
The Tegera 292 Waterproof Work Gloves are available in seven sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 6 | 152mm | 160mm |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
| Size 12 | Over 279mm | Over 215mm |
Please note that the 292 Work Gloves are designed to fit slightly closer than most gloves to allow you to perform intricate or delicate tasks without difficulty. The gloves feature a palm thickness of between 0.7mm and 0.8mm.
Materials of the Ejendals Tegera 292
- Palm Material: Full-grain goatskin
- Back Material: Spandex
- Lining Material: Thinsulate 40g
- Outer Material Specification: Leather, polyester, natural latex, elastane
- Middle Material Specification: Polyethylene (100%)
- Inner Material Specification: Polyester (100%)
Documentation for the Ejendals Tegera 292 Work Gloves
| Conformity Statement | Instructions for Use |
 | |
