Polyco Polygen Plus 35cm Long Fully Coated PVC Gauntlet Gloves P13
The Polyco Polygen Plus 35cm Long Fully Coated PVC Gauntlet Gloves P13 offer good levels of protection against a variety of different chemicals. Complete with a 35cm forearm for extra protection, these gloves are dexterous, versatile and highly resilient, meaning they prove useful across a range of industries where chemical protection is necessary.
Key Information
- Glove Codes:
- EN 374 - 1:2003
- EN 374 - 2:2003
- EN 374 - 3:2003
- EN 388:2003 Rating: 4121
- EN 420:230
- Size Range: 9 - 10
- Supplied as a pair
Resistance of the Polygen Plus Full Coated PVC Gloves
The Polygen Plus Full Coated Gloves have been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 374
| Chemical | Breakthrough time in mins |
| Acetic Acid 50% | >480 mins |
| Acetic Acid 99% | >120 mins |
| Acetone | >10 mins |
| Acetonitrile | >10 mins |
| Anisole | >10 mins |
| Ammonium Hydroxide 35% | >10 mins |
| Benzene | >30 mins |
| N-butyl Vinyl Ether | >10 mins |
| N,N-diisopropylethylamine | >60 mins |
| Ethyl Acetate | >10 mins |
| n-Heptane | >10 mins |
| Hydrochloric Acid 32% | >480 mins |
| Hydrofluoric Acid 40% | >480 mins |
| Hydrofluoric Acid 48% | >480 mins |
| Hydrofluoric Acid 72% | >60 mins |
| Methanol | >30 mins |
| Nitric Acid 70% | >60 mins |
| Phosphoric Acid 85% | >480 mins |
| Paraffin | >60 mins |
| Sodium Hydroxide 40% | >480 mins |
| Sulphuric Acid 30% | >480 mins |
| Sulphuric Acid 98% | >60 mins |
| Unleaded Petrol | >10 mins |
| Xylene | >10 mins |
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 2 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
Uses of the Polyco Full Coated PVC Gloves
The Polyco Full Coated Gloves offer good levels of protection against a range of different chemicals. Furthermore, the resilience and versatility of the gloves mean they can be used across a range of industries and appliances. Examples include:
- General management
- Waste management
- Utility
- Local authority
- Engineering
- Manufacture
- Janitorial
- Hair and beauty
- Chemical manufacture
- Chemical use
- Industrial cleaning
Key Features of the Polygen Plus 35cm Fully Coated Gloves
- Highly resilient against a range of chemicals
- Extra protection for the user with a 35cm long protective forearm
- Specially designed to be dexterous, which means they can be used for carrying and lifting in delicate situations
- High levels of abrasion resistance and good levels of tear resistance means these gloves are durable and will be long lasting
- Soft interlock lining eases donning, improves comfort, absorbs perspiration, keeps hands cool, and reduces hand fatigue
- Available in three sizes to suit most people
Sizing of the Polygen PVC Gloves
The Polyco Polygen PVC Gloves are available in three sizes that should suit the hands of most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 9 | 229mm | 192mm |
| Size 10 | 241mm | 198mm |
| Size 11 | 254mm | 204mm |
Safety Warning
The information contained on this site is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
Documentation for the Polygen Plus
| Conformity Statement | Instructions for Use |
 | |
