Portwest A689GR 35cm Cut-Resistant HPPE Grey Sleeve
With exceptional unparalleled level 5 cut resistance, the Portwest A689GR 35cm Cut-Resistant HPPE Grey Sleeve is an excellent choice when used for extra protection with a protective work glove. Level 1 contact heat resistance is supported by a dexterous and comfortable fit, meaning that the user stays safe and comfortable in applications such as fabrication, foundry and glass manufacture.
Key Information
- Sleeve Code: A689GR
- EN 388:2003 Rating: 454X
- EN 407:2004 Rating: X1XXXX
- EN 420
- Size Range: One universal size
- Supplied as a single sleeve
Resistance of the Portwest A689GR 35cm HPPE Grey Sleeve
The Portwest A689GR 35cm HPPE Grey Sleeve has been tested in accordance with EU standards to ensure high levels of performance. Please find the results below:
EN 388
| Property | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 5 |
| Tear Resistance | Level 4 |
| Puncture Resistance | N/A |
EN 407
| Property | Resistance Level |
| Burning | N/A |
| Contact Heat | Level 1 |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Molten Metal (Splashes) | N/A |
| Molten Met | N/A |
Uses of the Portwest A689GR Sleeve
Ideal for highly industrial environments, the Portwest A689GR Sleeve offers strong cut resistance and high heat protection. It is well suited to use inside and outside, in hot, dirty conditions and in dry and wet environments. Some applications where the sleeve has been recommended includes:
- Assembly
- Automotive
- Building
- Can handling
- Ceramics
- Construction
- Electronics
- Engineering
- Fabrication
- Food handling
- Food manufacture
- General handling
- Glass handling
- Glass manufacturing
- Industrial work
- Local authorities
- Machinist
- Mechanics
- Maintenance
- Materials handling
- Metal handling
- Oil and gas
- Outdoor work
- Railway maintenance
- Sheet metal handling
- Sheet steel handling
- Transportation
- Utilities
- Welding
Features of the Portwest A689GR 35cm Cut-Resistant Sleeve
- Designed to offer heat resistance of up to 100°C
- Features a HPPE liner that offers the maximum level 5 cut resistance
- Fitted with a thumb hole that provides a safe and secure fit
- Super fine 13-gauge liner enhances dexterity for user
- Low linting design reduces risk of product contamination
- Impressive abrasion resistance means sleeve is long-lasting
- Features a 35cm length design that protects most of the arm
- Approved as suitable for handling food
- Available in a range of sizes and two colours
- Please note that the Portwest Sleeve is sold as a single sleeve
Sizing of the Portwest A689GR 35cm Cut-Resistant HPPE Grey Sleeve
The Portwest 35cm Grey Sleeve is available in one size that should suit most users. The length is 35cm, which should protect the entire arm. However, if you require a different length, or would prefer a different colour, a full range is available on our website:
Documentation for the Portwest A689GR 35cm Sleeve
