Portwest FT15 Steelite Tove Trainers S1P (Black/Orange)
Whether you work outside, with hazardous machinery, or you simply just need comfortable yet protective shoes, then these trainers are your best bet. The Portwest FT15 Steelite Tove Trainers S1P (Black/Orange) guarantee safety and comfort through superior materials. With static, fuel, oil and piercing resistance, these trainers are ideal for use in a variety of environments for various hazard protection.
What's Included?
- 1 x Pair of Safety Trainers
- 1 x Set of Spare Laces
Key Information
- EN Standards: EN ISO 20345: 2011 S1P
- Certifications: CE Certified
- Marking: UKCA Marked
- General Resistance: Anti-static
- Sole Resistance: Fuel and oil resistant
- Midsole Resistance: Pierce Resistant
Key Features and Benefits
- Pair of anti-static trainers for use in a range of work environments
- Direct injected mesh with KPU cage provides strength and breathability
- Meets EN ICO:20345:2011 S1P for safe and legitimate use
- Protective steel toecap prevents toe injury from knocks and bumps
- Extra set of contrast laces included for cost efficienc
- Energy absorbing seat region absorbs shock to reduce injuries
- Pierce resistant composite midsole prevents against punctures
- CE certified and UKCA marked for reliable protection
- Fuel and oil resistant outsole for use with machinery and construction
- Dual-density sole unit provides a soft feel with a hard outer shell
- Prevents trips and falls on ceramic and steel surfaces
Sizing Guide
The Portwest Trainers are available in a range of sizes, based off of UK shoe sizes. Consult the table below and use the drop-down menu above to select your size.
| UK Shoe Size | EU Shoe Size |
| UK Size 3 | EU Size 36 |
| UK Size 4 | EU Size 37 |
| UK Size 5 | EU Size 38 |
| UK Size 6 | EU Size 39 |
| UK Size 6.5 | EU Size 40 |
| UK Size 7 | EU Size 41 |
| UK Size 8 | EU Size 42 |
| UK Size 9 | EU Size 43 |
| UK Size 10 | EU Size 44 |
| UK Size 10.5 | EU Size 45 |
| UK Size 11 | EU Size 46 |
| UK Size 12 | EU Size 47 |
| UK Size 13 | EU Size 48 |
What Do These Standards Mean?
- EN ISO 20345:2011 S1P
- "S" indicates that the footwear is intended for general use and offers basic protection.
- "1" specifies that the footwear has toe protection. It can be either a steel toe cap or a composite toe cap designed to protect against impacts.
- "P" indicates that the footwear has a puncture-resistant sole. The sole is designed to provide protection against sharp objects penetrating through the sole, such as nails or other sharp debris.
Therefore, EN ISO 20345:2011 S1P signifies that the footwear meets the European safety standards for general use, including toe protection and a puncture-resistant sole.
What Other Colours are Available?
We have a range of colour options available in the Portwest Steelite Trainers. Check them out below:
Comfortable and Protective
These trainers feature a lightweight design with perforated tops for extra breathability when working in hot environments. They also have a dual density sole unit, allowing for a comfortable cushioning on the feet and toes on top of a tough, slip-resistant sole for prevention of trips and falls.
Who Can Use the Portwest Steelite Tove Trainers?
Safety shoes should be worn in various work environments where there is a potential risk of foot injuries. Here are some common scenarios where safety trainers are typically worn:
- Construction Sites: Safety trainers are commonly worn in construction sites where there is a risk of falling objects, heavy machinery, and potential hazards on the ground. They provide protection against impacts, crush injuries, and punctures from sharp objects.
- Warehouses and Logistics: In warehouses and logistics settings, safety trainers are worn to protect against potential hazards such as heavy objects, rolling equipment, and potential foot injuries due to handling and moving materials.
- Manufacturing and Industrial Settings: Workers in manufacturing and industrial facilities often wear safety trainers to safeguard their feet from machinery, falling objects, electrical hazards, and various potential workplace hazards.
- Maintenance and Repair Work: Safety trainers are essential for maintenance and repair workers who may encounter sharp objects, slippery surfaces, and other potential hazards while performing their tasks.
- Engineering and Construction Inspections: Safety trainers can also be worn by engineers and construction inspectors during site visits or inspections to ensure their safety when they are in potentially hazardous areas.
Materials
These trainers feature a KPU moulded upper with mesh backing, for lightweight, breathable comfort all day long. This helps to enhance dexterity and provides robust protection against a range of common workplace hazards as mentioned above. For more information on the materials in these trainers, check out the below information:
- Upper: KPU and mesh
- Sole: EVA/Rubber
Our Supplier Says:
"Combining a modern trainer style with classic safety protection. The TPU moulded upper with mesh backing offers excellent breathability and comfort. Dual density EVA/rubber outsole for a lightweight and long lasting trainer that won't let you down, with superb comfort footbed with steel toecap and steel midsole."
Cleaning Instructions
- Use only soft brushes and water.
- Do not use substances like alcohol, thinners, gasoline, oil or any other chemicals.
- Keep the footwear, dry and clean, in a proper place at room temperature.
Technical Documents
For more information on the Portwest trainers, please see the below documents:
