Tool@rrest Heat Shrink Tool Tether

If you're looking to safely use hand tools while working at height, but don't want to deal with a cumbersome tool holder or case, the Tool@rrest Heat Shrink Tool Tether is a subtle, but safe solution. When you apply heat, the ring shrinks around your tool with a powerful adhesive, offering compact tool suspension with a D-ring to attach to a lanyard or carabiner. Available in two sizes depending on the size and weight of your tool, finding the perfect fit is easy.

What's Included?

• 1 x Heat Shrink Tool Tether

Please Note: the pliers in the picture above are not included.

What are the Maximum Safe Working Load of the Tethers?

The Tool Arrest Heat Shrink Tether is available in two sizes. Which size you pick depends on the weight of your tool:

• Small is graded for a safe working load up to 1kg
• Medium is graded for a safe working load up to 2.5kg

How Large are the Openings of the Tool Arrest Heat Shrink Tethers?

• Small has an opening that measures 24 x 50mm
• Medium has an opening that measures 50 x 50mm

What Kind of Tools is the Tether Designed For?

The Tether is designed to fit hand tools like wrenches, screwdrivers, pliers and hammers. As long as your tool has somewhere to secure the tether and is under one of the weight requirements above, it should fit.

How Does the Tool@rrest Tool Tether Work?

The Tool@rrest Lanyard is simple and safe to use with just a few steps:

1. Weigh the tool you want to attach to the tether and make sure it is under one the safe working load of your tether (1kg or 2.5kg)
2. Put the heat shrink loop onto the handle or shaft of your tool, make sure the D ring is on the outside or facing up
3. Apply heat to mould with heat gun for 30 seconds to 1 minute, until the loop has completely shrunk around the tool
4. Allow at least 20 minutes for adhesive glue on inside of the heat shrink loop to set before use
5. Attach the D ring to a lanyard, harness, scaffolding or other structure with a carabiner

For more information and a visual demonstration, please see the video below:

Compatible with Tool Arrest Range

This tether can be safely secured to a harness or tool belt like the Tool@rrest Adjustable Webbing Tool Belt with Comfort Padding, using a tool lanyard like those in the Tool Arrest range:

• Tool@rrest 2m Heavy Duty Coil Lanyard with Carabiners
• Tool@rrest 1m All-In-One Elasticated Tool Lanyard with Toggle
• Tool@rrest Retract 360 Tool Lanyard with Retracting Kevlar Cord

Documentation

• Conformity Statement

Returns Information

Please note that due to the nature of fall arrest products, we cannot accept any returns on this item. The reason for this is to ensure that all products that are dispatched provide protection to the level that is stated – we cannot attest to a returned product's safety of use as we do not know how it is handled or stored.

The above policy also applies to tool arrest equipment and tool lanyards. 

These restrictions on returns do not affect your statutory rights as a consumer.

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually displayed at the top of the page before adding the product to your basket. For products marked "In Stock Now", these will normally be dispatched either on the same day (if placed before 14:00 on a working day) or the next working day.

Please contact our Customer Care Team on 020 7501 0598 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.