Delta Plus EX120 Work Positioning Belt
The Delta Plus EX120 Work Positioning Belt is designed for work positioning tasks such as utilities and maintenance, with the comfortable sponge lining ensuring comfort during use. The fully certified design ensures protection when you need it most, helping to improve productivity and safety on the job.
Key Points of the Delta Plus EX120 Work Positioning Belt
- Lanyard Rings:
- Two side D Rings (Removable)
- Certification:
- EN 358
- EN 363
- EN 364
- EN 365
- Suitable for:
- Materials:
- Polyester webbing
- Polyethylene
- Galvinised steel
- Velcro
What Is the Delta Plus Work Positioning Belt For?
It is recommended that the Delta Plus Work Positioning Belt is used as a work positioning or suspension system. As the system is a belt, it must be connected only to a work positioning system, not a fall arrest system.
What Is Work Positioning (suspension)?
Work positioning refers to the application of fall protection equipment in scenarios where users are suspended in positions in order to carry out work at height. It is the law that anyone who works in work positioning has been provided with adequate training. Areas of use include:
- Telecom
- Utilities
- Industrial rope access
- Confined space
- Many more...
How Do I Fit the Delta Plus Work Positioning Belt?
If you haven't had training in fall protection, then you need to receive the adequate training before you carry out this line of work. Instructions for the EX120 are as follows:
- Fit the belt snugly around the waist.
- Refer to the image below for more information, or see the PDF below the image.
For more information, please see the PDF below.
Click Here for User Instructions |
|
How Comfortable Is the Delta Plus Work Positioning Belt
Working at height can be uncomfortable, and this is only made worse by ill-fitting work safety equipment and equipment with sharp or ragged edges and sides. The Delta Plus Work Positioning Belt features sponge back lining on the back, which takes the pressure off the sides of the actual belt. This is while the adjustment loop and Velcro ensure a secure fit, reducing pressure and ensuring comfort.
How Safe Is the Delta Plus EX120 Work Positioning Belt?
Delta Plus produce safe, reliable and fully certified fall protection and PPE produce every single year. The EX120 Harness adheres to the following standards:
- EN 358: Work Positioning - Confirms that the work positioning belt and lanyard have withstood a static force test for more than three minutes
- EN 365: General Requirements - Personal protective equipment against falls from height
- EN 364: Test Method - Personal protective equipment against falls from a height
- EN 363: Personal fall protection systems
What Materials Are Used in the Delta Plus Work Positioning Belt?
To ensure high quality performance, the Delta Plus Work Positioning Belt is designed using a range of materials. These include:
- Polyester webbing
- Polyethylene
- Galvinised steel
- Velcro
Conformity Statement
Click Here for the Conformity Statement |
|