Honeywell Miller H-Design Quick Fit Fall Arrest 2 Point Harness
The Honeywell Miller H-Design Quick Fit Fall Arrest 2 Point Harness features an interior pre-shaped mesh vest that allows you to quickly take the harness on and off. The harness is designed for fall arrest tasks, where the fully certified design will prevent falling from height.
Key Points of the Honeywell H-Design Quick Fit Harness
- Two point harness:
- Back Anchorage D-Ring
- Sternal Anchorage Point
- Certification:
- Suitable for:
- Materials:
- Polyamide webbing
- Stainless steel
- Galvanised steel
What Is the Honeywell H-Design Quick Fit Harness For?
It is recommended that the Honeywell Harness is used as part of a fall arrest system. As it is a 2-point safety harness, it is easy to use and offers exceptional freedom of movement.
What Is Fall Arrest?
A Fall Arrest system will not stop you from falling. It is instead a system that ensures a fall is carried out in a safe and controlled manner. This enables a worker to carry out their job, while a body harness is connected to a suitable shock absorbing system.
This will not prevent free fall. You will still fall, however be caught by a fall arrest block, rope, a lanyard and your harness. Training MUST be provided, and an escape plan MUST be in place before an accident takes place.
- Scaffolding
- Wind energy
- Tower crane erection
- Tower crane maintenance
- Pallet racking
- More...
How Do I Fit the Honeywell 2-Point Quick Fit Harness?
If you haven't had training in fall protection, then you need to receive the adequate training before you carry out this line of work. You can see full user instructions by following the PDF below.
| User Instructions |
 |
Key Features Of the Miller H-Design Harness
- DuraFlex Webbing offeers superb comfort during use
- Includes an interior vest for easy and quick fit
- Features a back D-ring and anchor ring for free movement
- Aluminium automatic buckles are very easy to use
- Designed for the construction and general industry sectors
- Certified to hold a maximum of 140kg
- Includes water-repellent properties for longevity
- Fully certified to ensure full safety
Quick and Easy Fit
The Honeywell Quick-Fit Harness is perfect for users who need to access their fall arrest harness fast. The harness features a mesh interior vest, that allows you to quickly take the harness on and off. This means that you don't need to worry about getting tangled in the harness when you put it on, as the mesh allows for a pre-shaped fit.
How Much Movement Do You Get While Wearing the Honeywell Harness?
When working in high environments, movement is key. The two point brace enables you to have full movement of your body and arms, helping you to work competently without feeling as though the harness is proving problematic to your work. The two points also allows you to position your body in more versatile ways, again, perfect for working from height.
How Safe Is the Honeywell 2-Point Harness?
Honeywell produce safe, reliable and fully certified fall protection and PPE produce every single year. The Honeywell Harness adheres to the following standards:
- EN 361: Full body harness - This standard states that the harness has passed the free fall test where 100kg is dropped in the harness.
What Materials Are Used in the Honeywell Harness?
To ensure high quality performance, the Honeywell Harness is designed using a range of materials. These include:
- Polyamide webbing
- Stainless steel
- Galvanised steel
Which Size Should I Choose?
The Honeywell H-Design Safety Harness is supplied in three different sizes. You can find the size that suits you by using the guide below before selecting your size via the drop down menu at the top of the page.
