Portwest FP48 Self-Retract Lifeline Arrest Block
The Portwest FP48 Self-Retract Lifeline Arrest Block is a retractable lifeline that is designed to be used in a fall arrest system. Supplied with a carbiner, shock absorber and swivel hook, this fully certified device is a crucial piece of fall safety equipment when used at height.
What's Included?
With your purchase you will receive:
- 1 x 1.35m Retractable Lifeline Arrest Block
- 1 x Carbiner
- 1 x Shock Absorber
- 1 x Swivel Snap Hook
What Is the Portwest FP48 Arrest Block For?
The Portwest FP48 Arrest Block is designed to be used as part of a fall arrest system, along with a carabiner, harness and rope if required. If you are using a fall arrest system it is crucial that you have an escape plan. The self-retractable design of this arrest block, allows the user to be returned back to the point where they originally fell.
What is a Fall Arrest System?
A fall arrest system is a system whereby when you fall, an arrest block will ensure that the fall is carried out in a safe and controlled manner. Depending on the type of equipment you use, you'll more than likely be suspended in the air should you fall, which makes it crucial that you have an escape plan. For more information on fall protection, please see our Introduction to Fall Protection blog.
Please note that it is the law that anyone using a fall arrest system must be trained by a professional.
How Do I Use the Portwest FP48 Self-Retract Lifeline Arrest Block?
Before use, you must have received training from a professional in fall safety equipment. There is a fall user instruction guide supplied with your purchase, or you can click on the link below.
Click Here for User Instructions |
|
Key Features of the Portwest FP48 Self-Retract Lifeline Arrest Block
- ABS plastic, steel, PVC and polyethylene for exceptional strength
- Fully compliant to EN 362 and EN 360 standards
- Features a total length of 1.35 metres
- Lightweight, high strength and water-resistant for rain use
- Will retract in case of a fall from height
What Standards Does the Portwest Arrest Block Comply With?
All fall arrest equipment must be fully certified. The Portwest FP48 Lifeline has been certified to the following standards:
- EN 362: Ensures that the connector has passed the strength test required.
- EN 360: Confirms that either a lanyard, self-retractable system or self locking device will protect against a fall from height.
What Materials Is the Portwest Self-Retract Lifeline Made From?
The Portwest Lifeline is made from the following:
- ABS Plastic
- Polyethylene Webbing
- Alloy Steel
- PVC
What Documentation Is Available?
Click Here for the Conformity Statement |
|