Portwest FP66 10m Roofing Kit
The Portwest FP66 10m Roofing Kit is designed for work positioning tasks at height, with a 10 metre kernmantle rope and a 12mm detachable rope grab that allows you to work across a roof safe in the knowledge that the rope grab will prevent you from falling in case you slip. All of the items in this kit are fully certified, giving you confidence that it will keep you safe.
What's Included?
With your purchase you will receive:
What Is the Portwest FP66 Roofing Kit For?
The Portwest FP66 Roofing Kit features a FP12 2 Point Comfort Harness, a FP27 Kernmantle Rope and an FP99 Drawstring Fall Protection Tool Bag. The kit is best suited to work positioning tasks where you are suspended above a height in order to complete your work. It has been designed for roofing, but can also be used for other similar tasks such as utilities.
What Is Work Positioning?
Work positioning is a fall protection system whereby a worker is suspended in a work position in order to carry out a job. This is usually at height, and anyone who works at this height MUST have adequate training. This system is useful for:
- Telecom
- Utilities
- Industrial rope access
- Confined space
- And more...
Please note that you cannot use a work positioning kit unless you have been trained in fall arrest systems by a professional.
Key Points Of the Portwest FP66 Roofing Kit
- FP12 Harness
- Harness Points: Two sliding dorsal rings
- Type of Work: Work positioning
- Materials: Polyester webbing, alloy steel
- Certification: EN 361
- FP27 Kernmantle Rope
- Rope Length: 10 metres
- Certification: EN 1891
- FP36 Rope Grab
- Materials: Steel
- Certification: EN 353
- FP30 Screwgate Carabiner
- Materials: Steel
- Breaking Load: 25kN
- Certification: EN 362
- FP99 Drawstring Bag
- Dimensions (HxW): 75 x 55cm
- Materials: Nylon, polyurethane
How Do I Use the Portwest FP66 Roofing Kit?
With your purchase you will receive instructions on how to use the FP66 Kit. Alternatively, you can find instructions for the kit by clicking on the links below. Finally, in the image below, you can view how to don a harness.
Click Here for User Instructions on the FP12 Harness |
|
Click Here for User Instructions on the FP30 Carabiner |
|
Key Features Of the Portwest FP66 Roofing Kit?
- Features a 2 point harness that has a focus on comfort
- Fully certified for work positioning tasks at height
- Supplied with a drawstring bag for carrying on the job
- Features a 10 metre long rope that is ideal for work positioning
- Special rope grab can catch you in case of rapid decline
- Suitable for roofing, building, utilities and more
How Safe Is the Portwest FP66 Roofing Kit?
The Roofing Kit has been fully certified to all relevant work from height regulation. This is to ensure your safety while you are at work. Certification can be found below.
- EN 358: Work Positioning: Fully certified to withstand weight in a work positioning system
- EN 361: Full body harness: This standard states that the harness has passed the free fall test where 100kg is dropped in the harness.
- EN 362: Connectors: Confirms that this product is suitable for use as a connector.
- EN 1891: Rope: Certifies that the rope is suitable for industrial rope access
- EN 353: Fall Grab: Standard for vertical fall arrest systems
What Documentation Is Available?
Click Here for the Conformity Statement on the FP12 Harness |
|
Click Here for Conformity Statement on the FP27 Rope |
|
Click Here for the Conformity Statement on the FP99 Drawstring Bag |
|
Click Here for the Conformity Statement on the FP36 Rope Grab |
|
Click Here for the Conformity Statement on the FP30 Carabiner |
|