Portwest FW09 S1P Steelite Safety Boots with Scuff Cap
Pierce-resistant, anti-static, anti-slip, and with a steel toe caps, the Portwest FW09 S1P Steelite Safety Boots with Scuff Cap is packed with features to ensure feet are protected whilst working in various hazardous work environments. Scuff toe caps at the front of the boots protect the leather which covers the toe cap, ensuring you a long-lasting pair of protective safety work boots.
What's Included?
Key Features and Benefits
- Protective safety boots suitable for a range of environments
- Meets EN ISO:20345:2011 S1P for reliable protection
- Steel toecap prevents toe damage from kicks and knocks
- Scuff cap protects the leather that covers the toe cap ensuring longevity
- Pierce-resistant steel midsole is ideal for use with dangerous machinery
- Anti-static properties for use in a range of work environments
- Slip resistant outsole prevent slips and trips on ceramic and steel surfaces
- Energy absorbing seat region absorbs shock waves
- Fuel and oil resistant outsole for use with machinery and construction
- Dual density outsole allows for a soft inside and robust outer protection
- CE certified and UKCA marked for reliable protection
Which Size Portwest Boots Is Right For Me?
The Portwest Boots are available in a range of standard shoe sizes. Please consult the table below and use the drop-down menu above to select your size.
| UK Shoe Size | EU Shoe Size |
| UK Size 3 | EU Size 36 |
| UK Size 4 | EU Size 37 |
| UK Size 5 | EU Size 38 |
| UK Size 6 | EU Size 39 |
| UK Size 6.5 | EU Size 40 |
| UK Size 7 | EU Size 41 |
| UK Size 8 | EU Size 42 |
| UK Size 9 | EU Size 43 |
| UK Size 10 | EU Size 44 |
| UK Size 10.5 | EU Size 45 |
| UK Size 11 | EU Size 46 |
| UK Size 12 | EU Size 47 |
| UK Size 13 | EU Size 48 |
What EN Safety Standards Do These Safety Boots Comply With?
The Portwest FW09 Boots have been tested and certified to EN ISO 20345: 2011 S1P. This signifies that this footwear meets the European safety standards for general use, including toe protection and a puncture-resistant sole.
- EN ISO 20345:2011 S1P :
- indicates that the footwear is intended for general use and offers basic protection.
- specifies that the footwear has toe protection. It can be either a steel toe cap or a composite toe cap designed to protect against impacts.
- indicates that the footwear has a puncture-resistant sole. The sole is designed to provide protection against sharp objects penetrating through the sole, such as nails or other sharp debris.
Read our guide about Safety Footwear Standards to learn more.
What Work Environments Are These Safety Boots Suitable For?
These safety boots are designed to provide protection to the feet in various hazardous work environments. They are typically worn in industries or occupations where there is a risk of foot injuries from falling objects, sharp objects, electrical and chemical hazards, slippery surfaces, or other potential workplace hazards.
Scuff Cap Design the Toe Area
The Portwest FW09 Safety Boots feature scuff caps at the front of the boots, protecting the leather which covers the toe caps. A scuff cap can be a valuable addition to a safety boot, and while this piece of material might be relatively small, it can have a big impact on the levels of durability and comfort of a boot.
Materials
- Upper: Split Leather
- Sole: PU/PU
How Do I Clean and Care for the Portwest FW09 Safety Boots?
To ensure your safety boots are cleaned and looked after properly, please see the following cleaning and care instructions:
- Clean and treat with a good proprietary cleaning product
- Do not use substances like alcohol, thinners, gasoline, oil or any other chemicals.
- Keep the footwear, dry and clean, in a proper place at room temperature.
- Where the boots are subjected to wet conditions, allow it to dry naturally in a cool, dry area and do not force dry
Documentation
.jpg)
.jpg)
