Welding Workwear Kit including Goggles, Gloves and Coveralls
Welding can pose a risk to your hands, your eyes and your body, so it's important to wear PPE that is both heat and flame resistant. The Welding Workwear Kit Including Goggles, Gloves and Coveralls is your perfect choice for welding tasks, as it includes fully certified work wear equipment that can keep you safe at work.
What's Included?
Why Buy the Welding Workwear Kit?
- Welding Protection: All products are certified for welding protection
- Covered: We ensure that your hands, eyes and body is protected
- Usability: Goggles are extremely user-friendly and easy to use
- Flame: Gloves and coveralls can resist flames and burning
- Shaded: Goggles will filter out even the bright lights of welding
Key Features
| | |
Bollé Coversal Welding Safety Goggles COVRP5 - Certified for use during welding activities
- Suitable for wearing over prescription glasses
- Will filter out harmful UV light
- Offer electrical and inflammability risks
- Supplied in one size for ease of use
| Ejendals Tegera 126A Welding Gloves - Offer resistance to burning, flames and heat
- Goatskin hands for superb dexterity
- Leather cuff protects the wrists
- Sensitivity in the fingers for tactile use
- Reinforced seams for extra protection
| Portwest MX28 Modaflame Welding Jumpsuit - Jumpsuit with welding, flame and heat protection
- Certified for use in welding tasks
- Radio loop for easy radio clipping
- Two brass way zip for ease of access
- Flame resistant qualities remain after washing
|
Why Should I Trust the Welding Workwear Kit?
All of the items in the Welding Workwear Kit have been fully certified to ensure your protection. You can view their standards below:
Bollé Coversal Welding Goggles
- EN 166 – Personal Eye Protection
- EN 175 – Welding Work Equipment
Ejendals Tegera 126A Heat-Resistant Welding Gloves
- EN 388 - 2111
- EN 407 - 412X4x
- EN 420
- EN 12477 - Type B (High Dexterity)
- EN 1149-2: R: 2.55 x 10⁵Ω
Portwest MX28 Modaflame Type 6 Welding Jumpsuit
- EN 11612 - A1, A2, B1, C1, F1
- EN 1149 - 5
- EN 11611 - Class 1: A1, A2
- EN 13034: Type 6
What Do These Standards Mean?
For more information on any of the standards above, please see the blogs below:
Which Size Should I Choose?
The Coversal Welding Goggles are only available in one size, meaning that you don't need to worry about measuring your face. The other two items, the jumpsuit and gloves do require sizing measurements. To find the correct size for you, please view the two guides below and select your size by clicking the drop down menus at the top of the page.
Sizing of the Tegera 126A Welding Gloves
The Ejendals 126A Welding Gloves are supplied in five different sizes, meaning they should be suitable for most users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
Size | Circumference (mm) | Length (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Size 11 | 279mm | 215mm |
Sizing of the Portwest Jumpsuit
To find the correct size for you please measure the circumference of your chest and your waist as illustrated in the diagrams below. Then you can find the appropriate size with reference to the table, and select it from the drop down menu at the top of the page. If you are between sizes we recommend you choose the larger.
Size | Chest Circ. (cm) | Waist Circumference (cm) |
Small | 92 - 96cm | 76 - 80cm |
Medium | 100 - 104cm | 84 - 88cm |
Large | 108 - 112cm | 92 - 96cm |
Extra Large | 116 - 124cm | 100 - 104cm |
XX-Large | 128 - 132cm | 108 - 112cm |
XXX-Large | 136 - 140cm | 116 - 120cm |
Documentation
Conformity and Instructions for the Ejendals Tegera 126A Welding Gloves
Conformity Statement | Instructions for Use |
| |
Conformity and Instructions for the Welding Goggles
Product Information Sheet | Conformity Statement |
| |
Conformity for the Modaflame Jumpsuit
Declaration of Conformity |
|